13X Molecular Sieve

ISO 9001:2000 Registered Manufacturer

AceChemPack Tower Packing Co., Ltd

中德卓越化工填料有限公司



	Home Contact AceChemPack ---- Products ---- Ceramic Balls Molecular Sieve Honeycomb Ceramic Activated Alumina --- Tower Packing --- Ceramic Random Packing Plastic Random Packing Metal Random Packing Structured Tower Packing --- Chem Ceramic --- Foamed Ceramic Acid-resistant Ceramic Heat Exchanger Ceramic & RTO --- Select Product --- By photos By Applications More ...

13X Molecular Sieve

Introduction
Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals.The pore size 13X molecular sieve is about 10 Å . It can adsorb any molecular smaller than 10 Å , mainly used as catalyze carrier, co-adsorption of CO2 and H2O, H2O and H2S, as desiccant for medical and air compressor system, and can also be adjusted to fit other various applications.

Application
Molecular Sieve 13X is mainly used for refinement since it implements simultaneous absorption for bi-molecule and tri-molecule and can be applied for liquefied and gaseous materials on the whole. Main adsorbing target are carbon dioxide, sulfuretted hydrogen and mercaptan including water and it can adsorb all the material whose molecular diameter is less than 10A.

Will adsorb, in sequence of adsorption rate, SF6, CHCL3, CHBr3, CHI3, N-C3F8, CCL4, N-C4F10, N-C7H16, CBr4, C6H6, B5H10, (CH3)3N, C(CH4)4, (C2H5)3N, C(CH3)C3CL, C(CH3)3Br, and C(CH3)3CH.The main uses are as follows.

1) Air refining (removing CO2 and H2O)
2) Removal of mercaptans and hydrogen sulphide from natural gas using patented Zeochem technology
3) Removal of mercaptans and hydrpogen sulphide from hydrocarbon liquid streams (LPG, butane, propane etc.)
4) Oxygen PSA (Pressure Swing Adsorption) process
5) special double glass (removing solvent and grease)

Formula: Na2O·Al2 O3·2.45SiO2·6.0H2O

Technical parameter:

Item	Unit	Target
Shape		Pellet		Bead
Diameter	mm	1.5-1.7	3.0-3.3	1.0-1.6	2.5-5.0
Size ratio up to grade	% min	98	98	96	96
Bulk density	g/ml	0.61-0.70	0.60-0.70	0.61-0.70	0.61-0.70
Wear ratio	% max	0.20	0.25	0.20	0.20
Crushing strength	Kg min		5.90		4.08
Static adsorption capacity	% min	25	25	25	25
CO2 air disposal	NL/g min	14	14	14	14
Moisture content	Wt% max 300⁰C	2.0	2.0	2.0	2.0

Regeneration
Molecular Sieve Type 13X can be regenerated by evacuating or purging, usually at elevated temperatures. The purge gas temperature must be sufficiently high to bring the molecular sieve to a level of 250°C - 300°C. A properly regenerated molecular sieve can produce dew points below -100°C, mercaptans and CO2 levels <2 ppmv

Package:

25kg carton box. Inner package, vacuumized with aluminum foil.
55 gallon iron drum.
As requirement of consumers.

Attention:

Do not unpack the goods until using, avoid of exposure in air for a long time.

Should be stuffed as rapid as possible at filling.

Other products:

3A Molecular Sieve , 4A Molecular Sieve , 5A Molecular Sieve , 13X Molecular Sieve, IG-3A Desiccant , 13XACS desiccant, Refrigerant desiccant, 5A Small Oxy-en rich Desiccant

E-mail: business@tower-packing.com MSN: AceChemPack@hotmail.com SKYPE: AceChemPack